Upgrade Samsung Galaxy Ace 2 I8160 to Android 4.1.2 firmware via XXMB2 Laked firmware



Galaxy Ace 2 is the mid-range of Samsung phones, launched almost 1 year and have been planning to upgrade to a version of Android Jelly Bean. However, users of this phone will probably have to wait a long time again while Samsung continues to upgrade for another phone line.
Jellybean Recently a leaked firmware for Galaxy Ace 2 has been introduced to provide users great choice for those who wish to experience this OS. The Firmware based on stock Jelly Bean version 4.1.2 for Galaxy Ace 2 XXMB2, clean and gently, do not add any other ingredients. The installation process requires you to use and does not require Odin to root the phone, but if your phone is root it after installing this firmware will lose root access and need to take root again.


Warning:

- Instructions below exclusively for Samsung i8160 Galaxy Ace 2, the application for other devices can lead to unwanted results.
- Guide is for general reference, our guide will not guarantee correct operation of the particular circumstances.
- Up ROM is direct intervention into the system will exist a certain risk to your device, we do not assume any responsibility for the risks that may occur on the device.
- Reading all instructions before proceed.


Requirements:

Samsung galaxy Ace 2 i8160.
Enable USB debugging mode for phone Settings -> Applications -> Development -> USB debugging
The computer was installed Windows USB driver for the device. You can install the driver software by installing Samsung Kies on the home page.
Backup all personal data such as contacts, communications, SMS, MMS, wifi password ...
Rechargeable battery for the device at least 60%
Download the following files on your computer:
Install Android 4.1.2 for Galaxy Ace 2
Step 1: Download and unzip the files in the Windows folder on the computer.
Step 2: On Odin 1.8.5
Step 3: Turn off your phone, boot mode phone in download mode by pressing and holding Volume Down key (-) + Home + Power.
Step 4: Connect your phone to the computer. If you have installed the drivers for the computer box on Odin will appear bright yellow ID: COM
Step 5: In Odin select the file in the following order:
Select "PDA" and select the file called CODE
Select "CSC" and select the file named CSC


Step 6: Note all the other options to default, did not change any other configuration.
Step 7: Click Start to start the Flash.
Step 8: The process is complete your phone will restart automatically and will appear in Odin green PASS message.
Note: The first boot time may take longer than usual. If your phone is stuck at the boot screen or restart the continuous follow these steps:
Remove the battery from the device a few minutes then reinstall the battery.
Boot into recovery menu
In Recovery select "wipe data factory reset" and "wipe cache partition"
Reboot the phone
Congratulations, you have successfully installed Android 4.1.2 on the Samsung Galaxy Ace Jellybean. Experience the new operating system.




Share your views...

0 Respones to "Upgrade Samsung Galaxy Ace 2 I8160 to Android 4.1.2 firmware via XXMB2 Laked firmware"

Đăng nhận xét

 

© 2010 F5phone - Phone News and Tips All Rights Reserved My Vina7 Computer